Premium Siding in Market

Siding is your Market home's primary defense against lateral rain penetration — and unlike regions with primarily vertical rainfall, the Pacific Northwest experiences significant wind-driven rain that strikes your walls at sharp angles, forcing water into any gap, crack, or failed seal in your exterior cladding. Properly installed siding with an integrated rain screen gap and correctly detailed flashing at all transitions creates a continuous weather barrier that allows your wall assembly to shed water and dry effectively between storms. In our climate, siding failures don't just look bad — they lead to hidden moisture damage within wall cavities that can destroy sheathing, insulation, and structural framing long before any visible interior signs appear. The average Market home with failing siding accumulates $15,000 to $40,000 in hidden structural damage before the homeowner becomes aware of the problem.

The mix of old and new construction in Market creates a wide range of exterior conditions, from deteriorating original wood siding and aging windows on mid-century homes to settling-related issues on newer townhome developments. Urban density also means that moisture can be trapped between closely spaced buildings, promoting mold and mildew growth on north-facing walls and shaded areas.

In Market, the most common siding failures we encounter include widespread rot in wood-based siding (particularly older hardboard and T1-11 panels) that has allowed moisture behind the exterior, cracked and faded vinyl siding that has become brittle from UV degradation and no longer seals against wind-driven rain, failed caulk joints at windows and trim that create entry points for water intrusion, and moss or algae growth on north-facing walls that retains moisture against the siding surface and accelerates deterioration. Many homes built between 1985 and 2000 in Market used hardboard siding products (some of which were subject to class-action lawsuits for premature failure) that are now well past their functional lifespan and actively allowing water into wall assemblies. We also commonly find improper flashing at deck-to-house connections, window installations without proper head flashing, and missing kick-out flashing at roof-to-wall transitions — all critical water management details that cause hidden rot.

Siding costs in Market depend on total wall area, material selection, the extent of underlying rot repair needed, number of windows and doors (which require labor-intensive trim and flashing detail), and building height (two-story and above requires scaffolding). James Hardie fiber cement siding installed typically ranges from $12 to $18 per square foot including labor, materials, and trim. LP SmartSide runs $10 to $14 per square foot installed. Vinyl siding is the most affordable at $7 to $11 per square foot installed. A complete re-side of a typical 2,000-square-foot Market home (approximately 1,500 square feet of wall area) ranges from $18,000 to $35,000 depending on material choice and complexity. Rot repair, if needed, adds $75-150 per sheet of replaced sheathing plus framing repairs at $50-100 per linear foot. Permits for full residing in most King County jurisdictions run $400-800.

Fiber cement and LP SmartSide siding require minimal maintenance in Market: annual inspection for caulk integrity at all trim joints and penetrations, gentle cleaning with a garden hose and soft brush to remove accumulated organic film (especially on north-facing walls), and touch-up painting every 10-15 years for field-painted surfaces (ColorPlus factory-finish Hardie typically lasts 15-20 years before needing recoat). Vinyl siding needs only occasional washing but should be inspected annually for cracks, particularly on south and west-facing walls where UV degradation is greatest. For all siding types, keep vegetation trimmed at least 6 inches away from wall surfaces, ensure sprinklers don't spray directly onto siding, and clear any debris that accumulates at the base where siding meets foundation. Check caulk joints at windows, doors, and utility penetrations every 2 years and recaulk with polyurethane sealant as needed — this is your primary defense against water infiltration at transitions.

James Hardie offers a 30-year non-prorated transferable product warranty on HardiePlank and HardiePanel products, plus a 15-year ColorPlus finish warranty guaranteeing against peeling, cracking, and chipping. LP SmartSide provides a 50-year limited substrate warranty (the longest in the industry for engineered wood) plus a 5-year finish warranty on pre-primed surfaces. Vinyl siding manufacturers typically offer lifetime limited warranties covering manufacturing defects. Red Raven Exteriors backs every siding installation with a 5-year workmanship warranty covering flashing details, caulk integrity, fastener performance, and overall installation quality. If any issue arises from our installation work within that period — a leaked joint, a failed flash, a panel that loosens — we return and repair at no cost. Our warranty is in addition to, not instead of, the manufacturer product warranties.

The Market neighborhood puts residents steps away from downtown Kirkland's shops, restaurants, farmers market, and waterfront attractions. The area has a vibrant, walkable urban village character that attracts both young professionals and long-time residents who value convenience and community.

Building permits for the Market neighborhood are issued by the City of Kirkland Development Services Department. We manage the permitting process for all our Market-area projects and stay current with any design guidelines that apply near the downtown core.